what nitrous goodies do i need to keep this safe???

[96mustang_james]

i have a compucar 125shot wet kit and all i have is the WOT switch i need to know what is the safest combination of acc. to get??? and as for the rpm switch, what is the part number that i need for my car i have a 96gt, i found a few on ebay,

msd #8956
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2432829262&category=33740

msd#8950
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2432269747&category=38655

will either of these will work for me, and what is the differance between the #8956 and #8950?


thank you for your replys.
james

[Black Hole]

window (rpm) switch
WOT switch
fuel pressure
bottle pressure

That's the minimum that I would go with.

[96mustang_james]

which one of the rpm activators in the first post is the one that i need???
and thanks for the reply,
james

p.s. i already have a bottle pressure guage, and a WOT switch. the WOT switch came with the kit.

[stangman98]

As listed before and if you don't have one get a blowdown tube also.

[96mustang_james]

Originally posted by stangman98
As listed before and if you don't have one get a blowdown tube also.

before i even start to put the bottle back in the car i will have all of the accessories to make it as safe as possible including a blowdown tube, BTW what purpose does it serve, is it just to make sure that if the bottle pressure gets to high and the pressure release valve blows then it will go outside of the car???

[RacerGT]

Originally posted by 96mustang_james
before i even start to put the bottle back in the car i will have all of the accessories to make it as safe as possible including a blowdown tube, BTW what purpose does it serve, is it just to make sure that if the bottle pressure gets to high and the pressure release valve blows then it will go outside of the car???

Exactly.

[96mustang_james]

Originally posted by RacerGT
Exactly.

thanks for the reply,
james

[stangman98]

There is usually a burst disk inside that fitting that I believe is rated at 3000psi on all bottles. If it gets higher then that it will blow the disk out and all your nitrous will blow out that tube and out of the car.
Trust me, this is the best thing you can do. I just got over severe 2nd degree Nitrous Burns and it was not pretty.

[96mustang_james]

Originally posted by stangman98
There is usually a burst disk inside that fitting that I believe is rated at 3000psi on all bottles. If it gets higher then that it will blow the disk out and all your nitrous will blow out that tube and out of the car.
Trust me, this is the best thing you can do. I just got over severe 2nd degree Nitrous Burns and it was not pretty.

trust me i am trying to make this as safe for my car as possible aswell as myself, thank you for your concern for my well being and i hope you get well soon!!!