Need help with window switch install

[1bad03gt]

I am trying to install my NX Window Switch in my '03 GT. It is the one that is already modified so that I don't need a tach adaptor. What I need to know is which wire do I splice into to get a tach signal? Thanks.

[Jay03Gt]

I spliced it into the wire going into my #8 coil driver. IIRC, one iwre is a solid color, and the other has a stripe. I think it is a white with red stripe that you need to tap into.
Go to this link, it insatlls the same as the shift light.
http://www.raptorperformance.com/99+_Mustang_Install.htm

[1bad03gt]

THANKS!!! That's just what I've been looking for. I was beginning to think that no one knew. Thanks again!

[Jay03Gt]

Someone helped me out with it, now I helped out someone. Isn't it great!:usa:

[1bad03gt]

I finished wiring it up today. It works perfectly. Thanks again!

[John Dough]

so, i should splice it into the wire that is green and white (number 26 in the pic from the link)?

[John Dough]

ttt

[Jay03Gt]

If your gonna put the window switch inside the car, yes you can do that. I found i easier to catch the coil driver wire under the hood, no feeding wires from inside that way.

EDIT My bad, yes the lgn/wht wire is the driver for the #1 coil. You can use that one as well as any other driver wire.