Has anyone used this stuff?

[Blueoval]

I am wanting to change my interior over to all black. I can do this one of two ways:

1. Either buy every piece for the all black interior and swap it over.

2. Use something like one of these:

http://secure.50resto.com/product1.cfm?SID=1&Product_ID=142

http://secure.50resto.com/product1.cfm?SID=1&Product_ID=513

Has anyone used any of this?

[DARKHRSE99]

I had a friend use that stuff to change his interior, and it doesn't look bad.

I had another friend go to a paint supply store and Buy the die to do it like the pros and sand the parts then mix the paint in a spray gun and paint his interior that way. I think that the second way is much better because it has a good coat on the parts and there is a less of a chance of it peeling off. My friend paid roughly 250.00-300.00 to die his interior.

[Kornnut]

A few fox body guys have used it on other boards, and seem to like the results.

[99GrandTouring]

I have used similar stuff that you can get at auto-zone its an interior dye....
I used it on hte interior of my beater car and It works perfect!!
I'll see if I can find pics of before/after

[99GrandTouring]

here you go.....
before

[99GrandTouring]

after....
Now given this was one of the WORST panels I had to do...
I was pleased with it..
Rem this is the stuff from autozone..

[Aviator]

VHT makes a really nice dye. I got it from Summit, satin black. It looks mint on the dark charcoal interior. I have only done testing so far, this summer I will complete it.

[Snkypete]

I used the Eastwood stuff on my '91 to convert it from red to black. Not one of the easiest transitions....

Surface prep is KEY!!! There are prep solvents that Eastwood and others sell to get the wax/grease off the panels, be sure to use them.

I never had a peeling problem, but scratches would reveal the red.