PDA

View Full Version : What MAF do you guys recommend??


blowngt
01-07-2004, 10:02 PM
I'm looking for something that can "grow" with me to 550+RWHP in a blower setup. I'm currently running an 80MM Pro-M. Will this do or should I be looking for something different?? :dontknow:

Bad99GT
01-07-2004, 10:07 PM
According to their website the 80mm will support 800HP. I'd say that'll be enough.

http://www.pro-flow.com/Pro-M%20meter_Gallery.htm

blowngt
01-07-2004, 10:09 PM
Originally posted by Bad99GT
According to their website the 80mm will support 800HP. I'd say that'll be enough.

http://www.pro-flow.com/Pro-M%20meter_Gallery.htm


Nice!!!!!!

One less part I have to worry about upgrading later:cheers:

Bad99GT
01-07-2004, 10:13 PM
One more thing, just in case you do get over 800HP, can I drive it?

:headbang:

blowngt
01-07-2004, 10:39 PM
Originally posted by Bad99GT
One more thing, just in case you do get over 800HP, can I drive it?

:headbang:


Deal!!!

Of course I'd have to hit the lottery first :thumb:

HyperGT
01-08-2004, 06:51 AM
I'll be using an 80mm RACE Pro-M and shooting for the same numbers. white99gt also uses an 80mm. (although i don't know if there is any difference with the RACE label?)

Bad99GT
01-08-2004, 07:16 PM
Originally posted by HyperGT
I'll be using an 80mm RACE Pro-M and shooting for the same numbers. white99gt also uses an 80mm. (although i don't know if there is any difference with the RACE label?)

Correction my dear friend. White99gt uses a 77mm Pro M. :stickpoke

HyperGT
01-09-2004, 07:04 AM
Doh, that's right! Oops :leave:

Brandon Alsept
01-09-2004, 07:14 AM
Well if I was doing a blower setup I think I would look at the Pro-M UNIVER. I have saw that thing on some very very high horsepower cars. Just because a part says it is good to a said horsepower level I am not sure if it is. Look at clutches for example, Spec stage II is good for what like 400 and something but people with 250 can burn em up. Just some food for thought ;)

5111
01-14-2004, 03:38 PM
I am using the 90mm Lighting MAF. I am not sure what it maxes out at, but it works for me now.

micool
01-15-2004, 10:16 AM
That 80 will work fine.................I'm using a 77.

blowngt
01-15-2004, 09:27 PM
Originally posted by micool
That 80 will work fine.................I'm using a 77.


Thanks!!

One less thing I have to worry about buying :cheers: