PDA

View Full Version : Does anyone know if rear control arms from a 99+ will work on a fox?

johndeerrm
10-05-2003, 04:22 AM
Anyone? Your reply is apreciated. :headbang:
RandyStinchcomb
10-05-2003, 09:08 AM
yes they will but you have to watch which ones you get as Ford makes 2 different lenghts for the SN95 chassis. 1 is 237mm center to center and the other is 242mm center to center, which will affect pinion angle.
fst blk pony
10-05-2003, 02:27 PM
actually the 99+ have larger bolt holes which will bolt up, but will not work properly
Bill Putnam
10-05-2003, 10:02 PM
Uppers are the same the lowers use different bolt sizes plus the length difference that Randy mentioned.

Bill
Rich@MD
10-29-2005, 10:42 PM
I put a set of MAC Uppers on a 1986 Mercury Capri (roundtrack car) and they worked great..... just my .02