Car made TOO much Power 514rwhp 446rwtq

[CraZeeStanG]

hey guys...
im exhuasted but pretty happy.
First i really NEED to thank Jimmy Vaccaro;). Also BIG THANKS to Jimmy LaRocca for personally tuning my car. :evilgrin:
She made 514rwhp 446rwtq It saw 10lbs at MOST.
we backed it down to 493rwhp 441rwtq, only 12 degrees of timing.. I have to shortshift at 6200rpms b/c im starting to go lean and running out of fuel. Remeber this is a stock block car . The D1SC is a BIG ASS blower, a little too much lol. Traction is not THERE with 18's and street tires. So i dont even want to go into times at all. But the next step will be some nice 15inch welds and some nice drag radials or ET Streets for the strip.
Im gonna leave her for now b/c its already too much power for the block and just be happy with shortshifting at 6200. Enjoy the car, Its plenty of fun. It pulls like a RAPED APE once i get traction. 80-150 is DAMM FAST.
well im gonna get some rest im dead tired.

-Zee:eek2:

[white99gt]

Congrats on finally getting it done.
Nice numbers for 4v ;) .
Better plan on a solid axle to make that power work on the strip.If not it will be leaving half shafts all over the place.:thumb:

[scothew]

awesome numbers for such low boost. Guess that D1SC does like to breathe. Also, can you give me any info on the Pro M Univer 3.0?? I am needing a maf in order to put my p1sc on and i havent ever heard of a 3.0.

Thanks
Scott

[CraZeeStanG]

thats the size i have calibrated for my 42lb injectors..
you can get a 3.0 univer anywhere you can get a univer 3.5.

[vortechcobra97]

Sweet.. wait for the first GSXR you see on the Highway.. he will be suprised!!!! :lol:

[Gaber]

Wow, those are some great numbers. :eek: Start saving for a forged bottom end. :evil:

[oz64cobra01]

Hey Crazeestang,
If you don't mind , How much did you pay for the D-1SC set-up run you? I also have a 2001 Cobra and want to go the same route. Your Cobra sounds like it is coming along real nice, awesome power and torque numbers. I have already put on the following: Ford Racing 4.10 gear & pinion set, UPR x-pipe, Magnaflow exhaust minus cats, Diablo chip, 275/40/17 all around, Accufab throttle body, Optima red top battery and open air filter.

[TorchedGT]

CraZeeStanG, those are great numbers....I've heard that Jimmy LaRocca is one of the best tuners out there. Your car should really be CraZee now:D

[CraZeeStanG]

oz64cobra 01: i paid 3601 for the D1sc kit shipped to my door, but that was a REAL LUCKY deal and i can never do that again or get that for anyone. I see them go for 3750 which is also a good deal. Superchargersonline.com as that price with free shipping.
:cheers:


TorchedGT: Jimmy LaRocca is by far one of the greatest procharger tuners out there. He was close to me somewhat, and i had a good connection to get him to personally tune my car so i went for it and couldnt be happier. Also the car DRIVES very smooth. This is my daily driver, and she sees a good amount of miles. I COULDNT BE HAPPIER. Car runs very smooth idles perfect forever and when you hit 3500K car launches and by 4500 im JUST HAULING ASS!!!!:headbang:

-Zee

[sc96cobra]

What duty cycle was your 42's injector working at if you know?

[white99gt]

Originally posted by sc96cobra
What duty cycle was your 42's injector working at if you know?

Probaly close to maxing out.
He cant reply right now.He totaled the car due to a car wreck.

But based on the HP numbers i know mine are close .So his should be to.

[sc96cobra]

He cant reply right now.He totaled the car due to a car wreck.

he wreck it?

[white99gt]

Originally posted by sc96cobra
he wreck it?

http://forums.modulardepot.com/showthread.php?s=&threadid=2304

[sc96cobra]

that sucks